Contact Us
LKV982KVM

4K@60Hz 40KM HDMI™ over IP KVM Optical Extender

This product is a 4K@60Hz HDMI™ KVM optical extender kit consisting of a transmitter and a receiver, using ipcolor STREAM technology for highdefinition, low-latency transmission. The 4k@60Hz HDMI™ signal can be extended up to 40km by LC single-mode fiber cable, supporting one-to-one connection, one-to-many connection via gigabit switch, or switch cascading. It also supports HDMI™ loop out, KVM, and RS-232 passthrough, and can be widely used in meetings, home entertainment, educational presentations, and other fields.
Introduction
Parameters
Downloads

LKV982KVM简版开发信.jpg

HDMI length
≤ 5m
Maximum transfer rate
18Gbps
Compatibility
HDMI 2.0
HDCP 1.4/HDCP 2.2
Resolutions
3840x2160@24/30/50/60Hz, 1080p@50/60Hz, 720p@50/60Hz, 1920x1200@60Hz, 2560x1440@60Hz, 2560x1600@60Hz
Connection types
One-to-one connection
One-to-many connection
Switch cascading
Transmission distance
Single-mode Optical Fiber≤40km
Transmission latency
80~140ms
HDMI output
LPCM 2.0
3.5mm L/R output
PCM
RS-232 (GND/RXD/TXD)
Default baud rate: 115200 Supported: 2400, 4800, 9600, 19200, 38400, 57600, 115200
Power Supply
DC 5V/2A
Power Consumption
TX ≤ 7.5W,RX ≤ 7.5W
Working temperature
- 10℃~50℃
Storage temperature
- 30℃~70℃
Humidity
0~90%RH (no condensation)
Housing
lron
Weight
TX: 307g,RX: 303g
Color
Black
Dimensions
106.0(L)*103.0(W)*20.6(H)mm
Protection
ESD protection
1a Contact discharge level 2 (±4KV)
1b Air discharge level 3 (±8KV)
Implementation of the standard: IEC61000-4-2
Lightning protection, Surge protection
Product Manual

Product specification

Update Firmware